PURE RSR ICON!
HPI Racing is proud to unveil the latest addition to the Sport 3 lineup: the legendary 1973 Porsche Carrera RSR
Reborn in 1/10th scale with an all-new 200mm bodyshell created from a brand-new body tool for enhanced detail and scale accuracy.
With its unmistakable wide-arch stance and timeless silhouette, this classic racer delivers instant presence on the road. Completing the authentic period-correct look is a brand-new set of wheels and tyres, developed to match the distinctive style and proportions of the original 1973 RSR.
Under the hood, this 1/10th scale version is built on the proven HPI Racing Sport 3 touring car chassis. It features a full-time shaft-driven, fully sealed 4WD drivetrain, waterproof electronics, 2.4GHz radio system, fully independent double wishbone suspension, and adjustable oil-filled shocks, making it Ready to Rock in any conditions. It delivers plenty of power for 4-wheel drifts and eye-popping speed at the pull of a trigger.
This officially licensed, expertly detailed body celebrates one of Porsche’s most iconic racing machines. From its aggressive front end and classic 911 profile to the wide rear arches and signature RSR attitude, it captures the spirit of the original, now brought to life for RC enthusiasts everywhere.
General Features
• Pre-assembled 1/10th scale Sport 3 on-road car chassis
• One-piece molded composite chassis
• Low profile chassis design for low center of gravity
• Full-time 4WD for excellent control
• Extra-strong metal-gear drivetrain ready for 3S LiPo
• Chassis accepts 6- or 7-cell NiMH or LiPo battery packs
• Adjustable battery position for more steering or more acceleration
• Enclosed receiver box protects the radio receiver
• Cam-type cast finned aluminum motor mount
• Fully enclosed drivetrain and differentials
• Efficient and tough shaft drivetrain
• Tough oil-filled 4-gear metal-gear differentials
• Double-wishbone adjustable racing suspension
• Racing-derived C-hub front suspension
• Oil-filled coil-over shocks with adjustable ride height
• Easy access to all critical maintenance points
• Dual bellcrank steering for precise steering control
• Cam-type spring-loaded servo saver
• Durable foam bumper protects the car chassis and body
• Adjustable body post mounts to allow most 190mm and 200mm wide bodies to fit
• 12mm hex hubs fit all available touring car wheels
• All hex head hardware for easy car maintenance
• Full set of rubber-sealed ball bearings for maximum efficiency
• Comprehensive instruction manual for easy maintenance
• Pre-Cut Factory Finished And Decaled Bodyshell
Sport 3 Flux - 1973 Porsche 911 Carrera RSR
• 3S LiPo Capable
• 4000KV Brushless Motor with 3.2mm Shaft
• Waterproof ESC and Water-Resistant Servo
• 2.4GHz Radio Set with Waterproof Receiver
• 26mm Front and 31mm Rear 1973 Porsche Fuch style Wheels
• High Sidewall Vintage tread tires
• Includes 4 x AA"s for TF-51 Transmitter
• Battery Pack and Charger not included
• NEW Factory suspension setup for better ground clearance and handling.
#161210 Sport 3 Flux 1973 PORSCHE 911 CARRERA RSR 1/10th Scale Pre-Assembled 4WD Car
with 2.4GHz Radio System and Painted Porsche 911 Carrera RSR body
SPECIFICATIONS:
Length: 468mm
Height: 135mm
Width: 200mm
Wheelbase: 254mm
What you need:
4 AA batteries
2S or 3S LiPo pack with T-plug - HPI Recommends #160161 2S LiPo or #160162 3S LiPo
Battery charger for car battery - HPI Recommends Reactor 200 – #118049 (US), #118050 (UK), #118051 (EU)
Reactor 600 - #160236 (US), #160237 (UK), #160238 (EU), #160239 (AUS)
LiPo Charge Case - HPI Recommends #160013 Plazma Pouch
