Pre-assembled 1/10th scale Sport 3 on-road car chassis
• One-piece molded composite chassis
• Low profile chassis design for low center of gravity
• Full-time 4WD for excellent control
• Extra-strong metal-gear drivetrain ready for 3S LiPo
• Chassis accepts 6- or 7-cell NiMH or LiPo battery packs
• Adjustable battery position for more steering or more acceleration
• Enclosed receiver box protects the radio receiver
• Cam-type cast finned aluminum motor mount
• Fully enclosed drivetrain and differentials
• Efficient and tough shaft drivetrain
• Tough oil-filled 4-gear metal-gear differentials
• Double-wishbone adjustable racing suspension
• Racing-derived C-hub front suspension
• Oil-filled coil-over shocks with adjustable ride height
• Easy access to all critical maintenance points
• Dual bellcrank steering for precise steering control
• Cam-type spring-loaded servo saver
• Durable foam bumper protects the car chassis and body
• Adjustable body post mounts to allow most 190mm and 200mm wide bodies to fit
• 12mm hex hubs fit all available touring car wheels
• All hex head hardware for easy car maintenance
• Full set of rubber-sealed ball bearings for maximum efficiency
• Comprehensive instruction manual for easy maintenance
• Pre-Cut Factory Finished And Decaled Bodyshell
Sport 3 Flux - 1973 Porsche 911 Carrera RSR
• 3S LiPo Capable
• 4000KV Brushless Motor with 3.2mm Shaft
• Waterproof ESC and Water-Resistant Servo
• 2.4GHz Radio Set with Waterproof Receiver
• 26mm Front and 31mm Rear 1973 Porsche Fuch style Wheels
• High Sidewall Vintage tread tires
• Includes 4 x AA"s for TF-51 Transmitter
• Battery Pack and Charger not included
• NEW Factory suspension setup for better ground clearance and handling.
#160788 Sport 3 Flux 1973 PORSCHE 911 CARRERA RSR 1/10th Scale Pre-Assembled 4WD Car
with 2.4GHz Radio System and Painted Porsche 911 Carrera RSR body
SPECIFICATIONS:
Length: 468mm
Height: 135mm
Width: 200mm
Wheelbase: 254mm
What you need:
4 AA batteries
2S or 3S LiPo pack with T-plug - HPI Recommends #160161 2S LiPo or #160162 3S LiPo
Battery charger for car battery - HPI Recommends Reactor 200 – #118049 (US), #118050 (UK), #118051 (EU)
Reactor 600 - #160236 (US), #160237 (UK), #160238 (EU), #160239 (AUS)
LiPo Charge Case - HPI Recommends #160013 Plazma Pouch
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
{{.}}
{{/content}}{{{.}}}
{{/content}}